acrylic finishing paste pen kit finishing system pen kit polishing acrylic polishing - Prokraft

Go to content

Main menu:

acrylic finishing paste pen kit finishing system pen kit polishing acrylic polishing

Turning System
Prokraft Acrylic Finishing Paste

Turning acrylic can be fun and rewarding but up to now has required considerable investment in sanding and finishing pads as well as a lot of time using them.

The Prokraft acrylic finishing paste does away for the need for multiple pads, water, towels on lathe beds etc.

It is a formulated mechanical abrasive unique to Prokraft and is the fastest, easiest, cleanest and least expensive way to get a great finish on your acrylic.

It comes in a small 10ml pot however only a very small amount (about 1/4 pea size) is required and depending on your skill level a good finishing cut could mean no sanding at all!

We recommend that if sanding is required that 400/600 grit is the finest you will need before using the paste.

How does it work? within the paste there are abrasive particles that gradually reduce in size as you polish, in effect it is like working through different grit sanding but without the hassle, time and expense, all you need is the paste and a little paper towel.

Once finished to your satisfaction any waxes and polishes can still be applied

The photo's opposite show some products that have been finished with the paste and there was NO SANDING before use.

Any rings remaining can be treated time and time again until they are gone!

You can now see a video of the paste in use - go to our Gallery / video page and click the link or click the link opposite.
Prokraft Acrylic Paste Video
Back to content | Back to main menu